Olimex LPC-MT2138 Board Support Package

This package contains project templates, system files and example programs for the Olimex LPC-MT2138.

CrossWorks Version 3 Installation Instructions

This package can only be installed if you have the following CrossWorks license bolt-ons:

• ARM License

To install this support package

1. Click the Tools > Package Manager menu option to open the package manager window.
2. Right click on the Olimex LPC-MT2138 Board Support Package entry and select Install Selected Packages.
3. Click Next to take you to the summary page.
4. Click Next to install the package.
5. Click Finish to close the package manager window.
6. Click the Tools > Show Installed Packages.
7. Click on the Olimex LPC-MT2138 Board Support Package link to view the package and its contents.

To manually install this support package

1. If you have not done so already, follow the CrossWorks Tasking Library Package and NXP LPC2000 CPU Support Package installation instructions.
2. Download the file Olimex_LPC_MT2138.hzq using your web browser.
3. Click the Tools > Manually Install Packages menu option.
4. Select the file you have just downloaded to install the package.
5. Click the Tools > Show Installed Packages.
6. Click on the Olimex LPC-MT2138 Board Support Package link to view the package and its contents.

To install this support package using other versions

• CrossWorks Version 1 Installation Instructions
• CrossWorks Version 2 Installation Instructions
• CrossWorks Version 4 Installation Instructions

Release Notes

1.1

• Fix CTL examples.

1.0

• Initial Release.

Documentation

Overview

This Board Support Package is intended for the Olimex LPC-MT2138. You must install the LPC2000 CPU Support Package to successfully compile and debug with this board support package.

Documentation

Please refer to the general LPC2000 CPU Support Package documentation for further information.

Examples

• The examples that generate an interrupt from a button press use the B2 button, the button closest to the LCD.
• The examples that use LEDs use P0.31 which is connected to the LED adjacent to the buttons on this board.
• The UART example uses UART0 (RS232 connector) running at 9600 baud, 8 data bits, no parity, 1 stop bit.