Driver for a VTI SCA3000 3-axis accelerometer.
All correct at time of writing, but as always, manufacturers love to move things around on their website.
This code has been tested using a SparkFun SCA3000 Breakout:
This is plugged into a custom CoreProto rivet and plugged into a SenseCore:
And finally installed on a SolderCore:
|SCA3000-D01||1.6 MHz||±2 g|
|SCA3000-D02||400 kHz||±2 g|
|SCA3000-D03||400 kHz||3.2 MHz||±1.1 g|
|SCA3000-E01||325 kHz||±3 g|
|SCA3000-E02||100 kHz||±6 g|
|SCA3000-E04||325 kHz||±18 g|
|SCA3000-L01||100 kHz||1.6 MHz||±4 g|
|sca3000_initialize_i2c||Initialize sensor on I2C bus|
|sca3000_initialize_spi||Initialize sensor on SPI bus|