Driver for a Linear Technology LTC2309 analog to digital converter.
All correct at time of writing, but as always, manufacturers love to move things around on their website.
This code has been tested using a Libelium Raspberry Pi to Arduino shields connection bridge:
Installed on a Raspberry Pi:
|LTC2309_I2C_ADDR||LTC2309 8-bit I2C address selected by AD1:0|
|ltc2309_init_i2c||Initialize device on I2C bus|
|ltc2309_sample_differential_bipolar||Sample channel in differential pair mode, bipolar|
|ltc2309_sample_differential_unipolar||Sample channel in differential pair mode, unipolar|
|ltc2309_sample_single_ended_bipolar||Sample channel in single-ended mode, bipolar|
|ltc2309_sample_single_ended_unipolar||Sample channel in single-ended mode, unipolar|