CTL_STATUS_t lis331hh_initialize_i2c(CTL_ACCELEROMETER_t *self,
                                     CTL_I2C_BUS_t *bus,
                                     int addr);

lis331hh_initialize_i2c initializes the accelerometer interface self with methods to communicate with a LIS331HH accelerometer on the I2C bus bus with 8-bit I2C address addr.

Once the accelerometer interface is initialized, you can use all standard accelerometer methods from the sensor API on the interface.

Return Value

lis331hh_initialize_i2c returns a standard status code.

Thread Safety

lis331hh_initialize_i2c is thread-safe if the transport transport is thread-safe. Typically, for SPI and I2C transports, you ensure thread safety by associating a mutex with the bus used by the transport.

See Also