Driver for a Freescale MMA7660FC accelerometer.
All correct at time of writing, but as always, manufacturers love to move things around on their website.
This code has been tested using a Seeed Studio MMA7660FC module:
This was attached to a SolderCore:
|Bandwidth (Hz)||Not configurable.|
|Range (g)||±1.5 (fixed)|
|Communication||up to 400 kHz (I2C)|
|MMA7660FC_I2C_ADDR||MMA7660FC 8-bit I2C address|
|mma7660fc_initialize_i2c||Initialize sensor on I2C bus|