Driver for a Bosch Sensortec BMP085 digital barometric pressure sensor.
All correct at time of writing, but as always, manufacturers love to move things around on their website.
This code has been tested using a SolderCore CorePressure module:
This was plugged into a SenseCore:
And finally installed on a SolderCore:
|BMP085_I2C_ADDR||BMP085 8-bit I2C address|
|BMP085_BAROMETER_t||BMP085 sensor state|
|bmp085_initialize_i2c||Initialize sensor on I2C bus|
|bmp085_set_resolution||Set sensor resolution|